National Partitions Two Story In-Plant Office Installation at Mills Pride - Sayre, PA

28' x 28' 2- Story In-Plant Install Page 4
The How You Do It Guide to Installing A Large Modular Structure.

Sold By Clegg Company
1444 S Kelly Rd.
Schenectady, NY 12306
518-864-5396
518-864-5474 fax

So, downstairs is up and roof deck is on, time for the acoustic ceiling work.  The standard light fixture sits in the acoustic grid, no need to hang from chains like some lighting.  And these install guys were fast too. Hint: Take a taut string across the room, below the "L" wall angle at 12' from wall to provide  a straight edge to align the "T" bars to when hanging from twist wires screwed to roof deck.

Tongue and groove deck is screwed to the corrugated steel.

Around the perimeter another bottom channel base is screwed.  HINT: Steel beams are going in this second story for a clear span room, the dimension between the opposing steel posts is critical, do not assume the deck is perfectly sized.  Measure across to get the dimension for the channel to set the wall in to match the beam and blue print right NOW.